Hi, I have a supermicro X10DRD-iNT which has two U.2 connectors on it.
I got two Intel 750 SSD's, 2.5" 400Gb. I can't get these to work.
If I plug both in, computer freezes at the last bit of POST, saying ready to boot...
If I plug one in (doesn't matter which one, i've ruled out faulty cables/connectors), it boots up fine.
then I'll have to hot-plug the other one once windows loaded, which half the time freezes windows.
I have managed to boot it all the way to windows with both connected twice over three days and probably hundreds of reboots.
nVME drivers installed, RST installed, SSD toolkit says they're both fine the few times i've been able to see them. updated firmware on both.
flashed BIOS to latest update, cleared CMOS. fiddled around with the UEFI settings.
supermicro support said something about the SSD's not having any option ROM. setting this to EFI or Disabled makes no difference.
i'm on windows 8.1 at the moment but also purchased a windows 10 pro license. both behave the same.
I don't have the OS on these disks, it's on a samsung evo on sata.
any thoughts?
thanks /Sam