Quantcast
Channel: Intel Communities : Unanswered Discussions - Solid State Drives
Viewing all articles
Browse latest Browse all 2098

SMART reading on INTEL SSDSC2BB48

$
0
0

I have installed 2 SSD on my Centos server.

Couple days ago i've checked smart info on one of them.

i'm affraid of two parameters, marked bold - 5, 175

Maybe somebody give me a link about correct interpretation smart for this model?

 

Thanks a lot!

WBR,

Michael.

Device Model:     INTEL SSDSC2BB480G7

Serial Number:    PHDV645400WC480BGN

LU WWN Device Id: 5 5cd2e4 14d52909b

Firmware Version: N2010101

User Capacity:    480,103,981,056 bytes [480 GB]

Sector Sizes:     512 bytes logical, 4096 bytes physical

Rotation Rate:    Solid State Device

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:   ACS-3 (unknown minor revision code: 0x006d)

SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)

Local Time is:    Wed Dec 20 16:42:24 2017 MSK

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

 

General SMART Values:

Offline data collection status:  (0x02) Offline data collection activity

                                        was completed without error.

                                        Auto Offline Data Collection: Disabled.

Self-test execution status:      (   0) The previous self-test routine completed

                                        without error or no self-test has ever

                                        been run.

Total time to complete Offline

data collection:                (    2) seconds.

Offline data collection

capabilities:                    (0x79) SMART execute Offline immediate.

                                        No Auto Offline data collection support.

                                        Suspend Offline collection upon new

                                        command.

                                        Offline surface scan supported.

                                        Self-test supported.

                                        Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

                                        General Purpose Logging supported.

Short self-test routine

recommended polling time:        (   1) minutes.

Extended self-test routine

recommended polling time:        (   2) minutes.

Conveyance self-test routine

recommended polling time:        (   2) minutes.

SCT capabilities:              (0x003d) SCT Status supported.

                                        SCT Error Recovery Control supported.

                                        SCT Feature Control supported.

                                        SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 1

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE

  5 Reallocated_Sector_Ct   0x0032   099   099   000    Old_age   Always       -       4

  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       7583

12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       20

170 Unknown_Attribute       0x0033   099   099   010    Pre-fail  Always       -       0

171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1

172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0

174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       18

175 Program_Fail_Count_Chip 0x0033   100   100   010    Pre-fail  Always       -       279756618142

183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0

184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0

187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0

190 Airflow_Temperature_Cel 0x0022   068   057   000    Old_age   Always       -       32 (Min/Max 26/43)

192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       18

194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       32

197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0

199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0

225 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       327349

226 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       430

227 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       89

228 Power-off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       454934

232 Available_Reservd_Space 0x0033   099   099   010    Pre-fail  Always       -       0

233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       0

234 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0

241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       327349

242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       2739705

243 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       392241

 

 

SMART Error Log Version: 1

No Errors Logged

 

 

SMART Self-test log structure revision number 1

Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error

# 1  Short offline       Completed without error       00%         4         -

# 2  Short offline       Completed without error       00%         3         -

# 3  Short offline       Completed without error       00%         3         -

# 4  Short offline       Completed without error       00%         1         -

# 5  Short offline       Completed without error       00%         1         -

 

 

SMART Selective self-test log data structure revision number 1

SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute delay.


Viewing all articles
Browse latest Browse all 2098

Latest Images

Trending Articles



Latest Images

<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>